fbpx

Jam Turbo

  • FT1100 4" Square Post
  • FT1300 Jam Arm System
  • FT216 36"x54" Tempered Glass Backboard
  • FT186 Heavy Duty Flex Goal
  • Lifetime Superior Warranty
  • Approx. Shipping Weight: 205 lbs.
Store Pick-up Available
Select store at checkout
Need help? Call us now!
SKU:
JamTurbo

Description

Jam Turbo Basketball System

1. VERTICAL POLE – Vertical pole shall be one-piece 4” square (sectional posts not

considered equal) with a minimum 11 gauge wall thickness and allow for burying 36” in

concrete. Posts with thinner wall thickness are not considered equal. Posts intended to be

buried less than 36” are not considered equal. Pole shall have a watertight vinyl cap to seal

out moisture.

2. EXTENSION ARMS – Adjustable extension arms shall be constructed of dual 2” x 2”

tubing. Extension shall allow for a minimum 24” from front of post to face of backboard

with rim at 10’ playing height. The height adjustment crank cylinder shall have a minimum

2000# capacity rating. Pole structure design shall allow for rim height to be adjusted

infinitely from 10’ down to 7’. Two springs mounted in the extension assembly shall be

included to minimize the amount of effort required to adjust the goal height when raising or

lowering the unit. Pole design shall permit the rim to be mounted directly to the extension

arm through the backboard so as to reduce stress on the backboard. An easy-to-read height

adjustment label shall register rim height.

3. BACKBOARD – Constructed of 1/4” thick clear tempered glass with bright white

ceramic markings fired into the glass. The framework shall be constructed from clear

anodized aluminum “L” type extrusions. Overall backboard size shall be

approximately 54” wide and 36” high.

4. RIM – Standard rim shall be of a flexible type so as to absorb the stress of player contact.

Spring action shall be provided by a heavy duty compression wire spring. A steel coverplate

must enclose entire internal mechanism. All structural components shall be built of no less

than 3/16” steel. Rim shall be of institutional quality with an official 5/8”diameter high

strength steel ring supported by a 3/16” brace supporting 60% of the ring. Rim shall be

punched to mount either a 3”x 4” or 5”x 5” hole pattern. Orange powdercoated finish.

5. WARRANTY – Pole, backboard, and standard rim shall carry Lifetime Superior

Warranty. Entire system weight shall be approximately 205#.

Additional Information

Weight 205 lbs
Dimensions 54 × 36 × 60 in