Roof Master Turbo

RoofMaster Turbo Basketball System

1. ROOF/WALL MOUNTING STRUCTURE – Structure shall be all welded steel

construction. Two ¼” thick wall/roof struts shall be provided with elongated slots for ease

of attachment (hardware for attachment to wall not provided). Two 1 ¾”x 1 ¾” perforated

tubes, I-Rod and 3/16” thick support channel shall also be provided. These items shall be

designed to form a variety of configurable shapes allowing the structure to be mounted to

virtually any roof pitch or vertical wall surface. Attachment area required shall be

approximately 36”x 40”.

2. EXTENSION ARMS – Adjustable extension arms shall be constructed of dual 2” x 2”

tubing. A height adjustment crank cylinder shall be mounted within the extension arms and

have a minimum 2000# capacity rating. Standard installation shall allow for rim height to be

adjusted infinitely from 10’ down to 6 ½’. Two springs mounted in the extension assembly

shall be included to minimize the amount of effort required to adjust the goal height when

raising or lowering the unit. A removable crank handle shall be provided. Design shall

permit the rim to be mounted directly to the extension arm through the backboard so as to

reduce stress on the backboard. An easy-to-read height adjustment label shall register rim

height.

3. BACKBOARD – Constructed of 1/4” thick clear tempered glass with bright white

ceramic markings fired into the glass. The framework shall be constructed from clear

anodized aluminum “L” type extrusions. Overall backboard size shall be

approximately 54” wide and 36” high.

4. RIM – Standard rim shall be of a flexible type so as to absorb the stress of player contact.

Spring action shall be provided by a heavy duty compression wire spring. A steel coverplate

must enclose entire internal mechanism. All structural components shall be built of no less

than 3/16” steel. Rim shall be of institutional quality with an official 5/8”diameter high

strength steel ring supported by a 3/16” brace supporting 60% of the ring. Rim shall be

punched to mount either a 3”x 4” or 5”x 5” hole pattern. Orange powdercoated finish.

5. WARRANTY – Structure, backboard, and standard rim shall carry Lifetime Limited

Warranty. Entire system weight shall be approximately 248#.